Phelan Dental Seminars

My Favorite Cements for Porcelain Veneers, Part 1

Dr Stephen Phelan February 1, 2011


Background

What should you look for in a luting composite?

I have received a number of e-mails during the last few weeks asking me what cement I am using for porcelain veneers. I thought this would be an excellent topic for a series of blog posts that would cover the materials I am using when I am bonding in a veneer case.

The first thing that I would like to point out is that I actually have 3 different kits of veneer luting composite in the practice that I like to use for different cases. Each kit is from a different manufacturer and each has a different amount of viscosity and opacity along with different shades for me to select from. The reason I have 3 kits is that there are some patients when I cannot find the correct shade or opacity of resin cement to match the surrounding dentition. In these cases, I will turn from my primary kit to one of the other 2.

The kits I use all have been designed with two areas in common. The first commonality is that each kit is designed as a light cured only system. I prefer to have complete control when I am bonding porcelain veneers into place. To maintain control the cement is only cured when I am 100% confident the restoration is seated in the correct orientation and all the margins are closed. This is only really possible with a light cured only luting composite. If you are a little slow with a dual cured system you may not have the restoration completely seated when the cement starts to set and you will be left with a poorly fitting restoration and open margins. I also prefer to spot cure my veneers into place and clean the interproximal excess before curing the overall body of the veneer.

Another benefit of using luting cement designed to only be light-cured is that the cement itself does not contain the unreacted amines necessary to react with the peroxides in the catalyst needed with a dual-cure cement. The bottom line is that this makes the cement much more color stable. The dental literature reports a potential color stability problem with cements that are designed to be both light-cured and dual-cured when used with the dual cured catalyst. This may not be a problem with a larger porcelain onlay but with a thinner porcelain veneer any change in the luting cement color over time may result in a change in the veneer and an unhappy patient.

The second important area in common with the 3 kits is that they all have a water-soluble try-in gel that allows me to test out the selected shade of luting composite before I commit to bonding the restoration into place. I feel this is a very important feature to have with any kit designed to lute porcelain restorations because the luting composite will affect the value and color of the veneers.

The next area you will want to look at are the actual physical properties of the materials. The manufacturers are providing us with many excellent products in the dental field but my preference with porcelain veneers is to use materials that have a number of years (preferably 5 years, check out the pictures below from a 4 unit veneer case that was 6 years old last month) of clinical evidence supporting their use. I would like a color stable material with a low film thickness and excellent compressive, flexural and tensile bond strength that is easily polymerized in the 400 to 500 nm wavelength.

I would also like a material that will clean up easily around the porcelain restorations

Next week, in part 2 for this series I will let you know the kit that I use for the majority of my porcelain veneer cases. Can you guess what this kit is?

If you have any questions or comments, please feel free to leave them using the link above.

Post comments (10)
  1. Peter on February 4, 2011

    Hi Stephen,
    I want to restore my bite, a 90% deep bite to a more ideal 1mm OB, with conservative (ie no prep) onlays. I’m most concerned with how this will change the interproximal contact/embrasures and the expectations for retention of the onlays long term.

    Have you done this before??
    Do you have Cont. Ed. material that covers this procedure??

    Thxs,

    Peter

    • Dr Stephen Phelan on February 4, 2011

      Hi Peter,

      I will be talking about opening the vertical dimension with bonded onlays at my next seminars in April. I have treated quite a few cases this way and have 3 that are in the 11 to 12 year range. One is on an Orthodontist from the area and I completed it in the 90’s.
      You can email me direct if you have any other questions. I would preform a functional analysis and complete exam before treatment planning a case like yours but yes I have done this before and have long term follow up photos from many of the cases.

      Best regards,
      Stephen Phelan

  2. Kent on February 4, 2011

    What do you use to put behind the dentition when you are taking close up photos so that it looks totally black and you can’t see the tongue, cheek etc?
    I have not been able to find anything that is black and sterilizable.
    Great Case
    Thanks

    • Dr Stephen Phelan on February 4, 2011

      Hi Kent,

      I am using a Contrastor by Photomed. It can be bagged and sterilized and works really well.

      Thanks,
      Stephen

  3. Eunice Berger on February 3, 2011

    Beautiful pictures/results.
    What do you use to polish the margins?
    Thanks
    Eunice Berger

    • Dr Stephen Phelan on February 4, 2011

      Doug,

      Thanks for the positive feedback! It is really appreciated.

      Best Regards,
      Stephen

    • Dr Stephen Phelan on February 4, 2011

      Eunice,

      Thanks for the comment! I am using a high-speed brownie point at half speed with lots of water to polish the margins. I follow that up with Porcelize and a Flexi-Point by Cosmedent.

  4. Dr Doug Johnston on February 3, 2011

    you always have useful information that i can use every day. keep sending the tips and future courses.
    doug johnston

  5. Dr. James Miles on February 3, 2011

    Stephen

    Can you do a blog on overlay posterior restorations to restore the vertical dimension in severe abrasion cases? I know there are a lot of pre-restoration considerations and management issues. I am inclined to using gold on molars and porcelain in more esthetic areas.

    Thanks for these excellent articles,
    Jim Miles

    • Dr Stephen Phelan on February 4, 2011

      Jim,

      I am covering that topic in my next seminar in April but I may talk about it in a future blog post as well.

      Best Regards,
      Stephen

Leave a reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

OUR GOAL IS EXCELLENCE IN ONLINE DENTAL EDUCATION

Join our email list and receive a free sample webinar from one of our online courses.
This month we will send you a sample members webinar from Composite Mastery Online.